High Precision 16-bit, 16-Channel DAC
80 MHz ARM Cortex-M MCU
built on the STM32 MCU
High Precision DAC81416 from TI
Open Hardware
The design files including the firmware are available as open source contents.
An Integrated 65nm sub-circuit at microwave frequencies for biosensing application
Integrated Inductor Design
Supports the generation of integrated inductors, transformers and baluns.
Custom Via Padstack designer
Allow the design of custom DRC compliance via pad stack
Custom Guard Ring Design
customised guard and Dummy fillings
Intuitive UIX
An easy and intuitive GUI to ease the design process
Conure
Two 24-bi ADC sampler of loadcell
Features loadcell amplifier and sampling at 24-bit
Inductive Position sensor
On board linear inductive position sensor coil
Position sensor sampling
Sampling of the linear position at 24-bit
ARM Cortex M MCU at 120 MHz
Features a fast 120MHz Cortex-M microcontroller
Onboard CAN transceiver
CAN 2.0B communication for data transfer and custom bootloader programming.
Simple Schematic Circuit
Dual-mode Probe interface
Tunable Phase
Test Rig
Landed Probes
using two GSGSG probes for a four port network analysis.
Automated Testing
Automated testing using the VISA protocol for the VNA.
Tunable Gaussian Pulse Generator
Fast Microcontroller
Features a fast 80MHz Cortex-M Microcontroller
MIDI Connectors
Support for simultaneous use of both USB-MIDI as well as traditional DIN9 connectors.
Pedal Connector
Connector for three-pedal system
Standard Connector
Standard Connector for the Fatar-88 key-bed
Fast MCU
Featuring a fast STM32F series MCU at 80MHz
Color LCD Display
A 2.5 inch color display at 240x230 resolution
USB Communication
Control and communication over USB connector, including support for flash programming.
Interactive Buttons
supporting 12 interactive buttons and one reset button.
Analog Multiplexor
MAX4617 2x4 channel analog multiplexor
80 channel analog multiplexor
use 10 units of MAX4617 offering 80 multiplexed analog channe. Designed to be stacked over a Xilinx FPGA board.
4 channel ADC per unit
Each unit use an AD7991 chip which features 12-bit sampling
96 channels total
Supports 24 units of analog multiplexors, providing a massive 96 channel sampling.
FPGA Connector
Header connection to stack an FPGA (designed for Cora-Z7 from Xilinx)
Custom Testboard
Die mounting PCB with ENIG surface finish for wire bonding bonding.
Exposed die and wire bonding
bare die mounted directly on PCB for test using probe pads
Probe pads
Design use 2x GSGSG probe pads at 100um pitch for wafer level high frequency RF performance testing
Testing using high speed VNA
Measurement using high performance VNA
UWB pulse generation
generating gaussian pulse with tunable temporal width for UWB application.
Tunable Gaussian Pulse Generator